IBM ServeRAID drivers v7.12.11 for SCSI and SUSE Linux - Servers and IntelliStation



Change history

Version 7.12.11

Problem(s) fixed:

  • Fixed a problem with 4H in which a spanned array is broken by copying the configuration from the drives
  • Fixed a problem on the 7k tape support with SCSI pass-through status in Windows 2000/2003

Enhancement: N/A
Limitations: N/A
Dependencies: N/A

Version 7.12.07

Problem(s) fixed:

  • Fixed a problem with error recovery for media errors on RAID levels 1 and 5

Enhancement: N/A
Limitations: N/A
Dependencies: N/A

Version 7.12.04

Problem(s) fixed:

  • Fixed a problem with defunct drive not able to be replaced. If a drive is DDD and is not part of an array, the FW now allows the user to change the drive
    state from DDD to DHS using ipssend.
  • Fixed a problem with failure to import configuration on 7k when replacing both the controller and a bad drive at the same time.
  • Removed 48 hour time limit for rebuild operations. 2TB RAID 1E0 arrays can take over 48 hours to rebuild. Rebuild timeout is now 10 minutes per stripe.

Enhancement: N/A
Limitations: N/A
Dependencies: N/A

Version 7.10

Problem(s) fixed:

  • Fixed a problem with the ServeRAID-5i firmware concerning dead battery recognition.

Enhancement: N/A
Limitations: N/A
Dependencies: N/A

Version 6.11

Problem(s) fixed:

  • Fixed a problem with tape drive firmware updates.

Enhancement: N/A
Limitations: N/A
Dependencies: N/A

Version 6.00

Problem(s) fixed: N/A
Enhancement:

  • Initial release supporting IBM ServeRAID-6i and ServeRAID-6M Ultra320 SCSI controller.

Limitations: N/A
Dependencies: N/A

 

To view PDF files you must have the latest version of Adobe Acrobat installed on your system.

Supported products

Supported systems

 

Supported options

 

Supported operating systems

 

Applicable countries and regions

 


Document id:  MIGR-5072186
Last modified:  2007-12-18
Copyright © 2014 IBM Corporation