IBM ServeRAID drivers v7.12.11 for SCSI and Microsoft Windows Server 2003 - System x

See SCSI (ServeRAID-3L, 3H, 3HB, 4L, 4Lx, 4M, 4Mx, 4H, 5i, 6i, 6i+, 6m, 7k, 7t) support files matrix for additional support materials.

Change history

ServeRAID Family 7.10 to 7.12

  • Fixed error code:2807 on ServeRAID-7k during system reboot on IBM xSeries 346
  • Increased timeout for commands on tape devices attached to a ServeRAID-7k
  • Fixed erroneous defective battery message after one day of use on the ServeRAID-7k
  • Fixed ServeRAID-7k error LED not lighting when battery cable is unplugged
  • Fixed file corruption on Raid level-5 logical drive after a logical drive migration and several rebuilds\
  • Fixed problem with sendmail operation in Linux environment with security enabled

ServeRAID Family 7.00 to 7.10

  • Support for the IBM ServeRAID-7k Ultra320 SCSI controller
  • Fixed a problem with the ServeRAID-6M that affected performance at high I/O loads.

ServeRAID Family 6.11 to 7.00

  • Support for the IBM ServeRAID-7t SATA controller
  • Support for the Adaptec HostRAID controller
  • Support for new operating systems:
    • Microsoft Windows Server 2003, Web Edition
  • Fixed a problem with LSI PFA handling. To enable automatic PFA alerts, the MRIE field in the Information Exceptions Control mode
    page is monitored for any value other than 4 and changed accordingly.
  • Fixed a problem that caused the device driver installation to fail under Microsoft Windows 2003 for AMD64.
  • Fixed an intermittent POST hang problem when the ServeRAID-5i is forced to run at 33Mhz in x225 by a 33Mhz adapter in adjacent slot 5.


To view PDF files you must have the latest version of Adobe Acrobat installed on your system.

Supported products

Supported systems


Supported options


Supported operating systems


Applicable countries and regions


Document id:  MIGR-5072187
Last modified:  2009-01-16
Copyright © 2015 IBM Corporation