ASU cannot modify UEFI settings with dependencies - IBM System X and BladeCenter



Source

RETAIN tip: H207004

Symptom

The Advanced Settings Utility (ASU) may show a Unified Extensible Firmware Interface (UEFI) setting as configurable when in fact it is not available because of a dependency on other settings.

For example,

  It is impossible to set DevicesandIOPorts.RemoteConsole without the setting DevicesandIOPorts.COMPort1=Disable

It appears from the ASU interface that the setting was changed as expected when it actually did not take effect.

Affected configurations

The system is configured with at least one of the following:

  • Advanced Settings Utility, any version

This tip is not system specific.

This tip is not option specific.

Note: This does not imply that the network operating system will work under all combinations of hardware and software.

Please see the compatibility page for more information: http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/

Solution

ASU has corrected the assessment method on OEM in the IBM ToolsCenter Suite 12D release.

The file can be downloaded at the following URL:

Workaround

Users can set UEFI settings from the F1 menu.

Additional information

Previous versions of ASU supported checking dependency conditions on Integrated Management Module II (IMM2) systems, but not on Integrated Management Module (IMM) systems.

For Original Equipment Manufacture (OEM) IMM2 system, ASU used the wrong assessment method, so ASU considered an OEM IMM2 system as an IMM system. As a result, ASU did not check dependency conditions on the OEM IMM2 system.

Applicable countries and regions

 


Document id:  MIGR-5091915
Last modified:  2012-11-16
Copyright © 2014 IBM Corporation