IBM ServeRAID M Series and MR10 SAS Controller Driver v6.600.25-3 for Microsoft Windows - IBM BladeCenter, Flex Systems, and System x



Change history

Severity: Suggested

IBM ServeRAID M Series and MR10 SAS Controller Driver for Microsoft Windows

Adapters Supported:

  • ServeRAID M5210e SAS/SATA Controller for IBM System x
  • ServeRAID M5210e SAS/SATA Controller
  • ServeRAID M5115 SAS/SATA Controller for IBM Flex System (90Y4390)
  • ServeRAID M5110 SAS/SATA Controller for IBM System x (81Y4481)
  • ServeRAID M5110e SAS/SATA Controller for IBM System x
  • ServeRAID M5120 SAS/SATA Controller for IBM System x (81Y4478)
  • ServeRAID M5016 SAS/SATA Controller (90Y4304)
  • ServeRAID M5015 SAS/SATA Controller (46M0829)
  • ServeRAID M5014 SAS/SATA Controller (46M0916)
  • ServeRAID M5025 SAS/SATA Controller (46M0830)
  • ServeRAID M1115 SAS/SATA Controller for IBM System X (81Y4448)
  • ServeRAID M1015 SAS/SATA Controller (46M0831)
  • IBM ServeRAID-MR10ie (CIOv) SAS Controller for BladeCenter (46C7167)
  • IBM ServeRAID MR10is SAS Controller (44E8695)
  • IBM ServeRAID MR10il SAS Controller (44E8767)
  • IBM ServeRAID MR10M SAS Controller (43W4339)
  • IBM ServeRAID MR10i SAS Controller (43W4296)
  • IBM ServeRAID MR10k SAS Controller (43W4280)
  • MegaRAID 8480 SAS Controller (39R8850)

Note to service: See RETAIN TIP H204972

Version: 6.600.25-3

Severity: Suggested

Version 6.600.25.00-3 - Suggested
Enhancement(s):

  • Add support for Windows Server 2012R2

Version 6.600.25.00 - Suggested
Enhancement(s):

  • Add support for ServeRAID M5210e and ServeRAID M5210e SAS/SATA Controllers
  • Fixed an issue where the IO command timeout value for TAPE devices need to be set from OS instead of default timeout value of CUDA.
  • Fixed an issue where the system hangs on removing the SSD-cache virtual disk while IO is running.
  • Fixed an issue where INTERRUPT EXCEPTION is not handled.
  • Fixed an issue where the system crash during sequence reads.
  • Fixed an issue where the hibernation (s4 sleep state) is not working on Windows Server 2012.
  • Added Multiphase Resume Feature For Windows 2012 driver.
  • Modified driver to boot the system to iMR mode if NVRAM is not initialized.
  • Fixed an issue where Hardware Malfunction BSOD occurs in Windows during second rebuild.
  • Fixed an issue where performance drop in 256 KB sequence writes by driver.
  • Fixed an issue where BSOD occurs while creating R10 with spundown drives.
  • Updated qdepth for jbods min and max values.
  • Added support for setting the queue depth dynamically for physical disks based on the number of configured devices (JBOD) in iMR firmware.
  • Fixed an issue where WHQL sleep stress test fails with device driver 5.2.127
  • Fixed CrashDump issue in JBOD Mode.
  • Added JBOD FastPath IO support for SysPD
  • Fixed an issue where the windows driver was unable to process more than 20 outstanding commands per disk.
  • Added 4K sector support for Windows 2012

Version 6.506.01 - Suggested
Enhancement(s):

  • Device diver modified to allow the user to enable and disable online controller reset rate (OCR) without a reboot being required.

To view PDF files you must have the latest version of Adobe Acrobat installed on your system.

Supported products

Supported systems

 

Supported options

 

Supported operating systems

 

Applicable countries and regions

 


Document id:  MIGR-5092020
Last modified:  2014-07-21
Copyright © 2014 IBM Corporation