Incorrect values set in contact and location from learned settings - IBM Servers
RETAIN tip: H207267
Contact and Location fields in Integrated Management Module (IMM) may not be set to the proper values and may have default values instead.
If an extended IMM pattern is being included in the Server Pattern, the extended IMM pattern must be edited and ensure that 'SNMP Contact' and 'SNMP Location' are set to blank (found under IMM --> Network Settings Interface), otherwise the fields will conflict with the same settings found in the System Information pattern.
On deployment, this will result in the fields being defaulted to Contact and Location values instead of the desired values.
The system is configured with at least one of the following:
This tip is not system specific.
This tip is not option specific.
Note: This does not imply that the network operating system will work under all combinations of hardware and software.Please see the compatibility page for more information: http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/
The fix was distributed as part of FSM 1.3.0 (GA4)
The file is available by selecting the appropriate Product Group, type of System, Product name, Product machine type, and Operating system on IBM Support's Fix Central web page, at the following URL:
Select a value of 'no pattern selected' for the Extended Settings Pattern element, or go into the IMM web interface after deployment to correct the value.
Setting Simple Network Management Protocol (SNMP) Contact and Location reinitializes the server Contact and Location fields to their default values.
Applicable countries and regions
Document id: MIGR-5092270