https://www-947.ibm.com/systems/support/myview/subscription/css.wss/folders?methodName=listMyFolders&navBar=0&tabInd=0The latest updates about Rational Data and Application Modeling Bundleen-USCopyright 2007 IBM Corporation. All rights reservedcssadmin@us.ibm.com (CSN Administrator)Tue, 24 Nov 2009 14:41:00 GMTSat, 28 Nov 2009 20:31:57 GMThttp://www.ibm.com/i/ibm_logo_120x60.gifhttps://www-947.ibm.com/systems/support/myview/subscription/css.wss/folders?methodName=listMyFolders&navBar=0&tabInd=0http://www.ibm.com/support/docview.wss?uid=swg21412372&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RIn IBM Rational Software Architect 7.5 and later it is no longer possible to enter Tab characters in the yellow sticky notes and comments.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21412372Tue, 24 Nov 2009 14:41:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21412212&myns=swgrat&mynp=OCSS4JE2&mynp=OCSSRTLW&mynp=OCSSCLKU&mync=RAttempts to use the feature "Compare With > Each other" on a model that has fragments results in the error "An EMF error occurred while merging resources: Invalid index -1".Problem solving informationTechnotes(Troubleshooting)swgrat.swg21412212Mon, 23 Nov 2009 11:40:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21408828&myns=swgrat&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RIn IBM Rational Software Modeler, using the feature "Compare With > Each Other" on 2 models will report no changes between the models although there are some changes in the fragments.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21408828Mon, 23 Nov 2009 08:08:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21404420&myns=swgrat&mynp=OCSS4JE2&mynp=OCSSCLKU&mync=RThis technote gives the steps required to create a PaletteStack with different domain elements using a Profile Tooling Plug-in Project with IBM Rational Software Modeler, IBM Rational Software Architect for Websphere or IBM Rational Software Architect Standard Edition.Problem solving informationTechnotes(FAQs)swgrat.swg21404420Sat, 21 Nov 2009 13:13:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg27010975&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSJP3D&mynp=OCSSRTLW&mynp=OCSSCLKU&mync=RThe following table provides a product comparison of the features and functions of the Architecture Management version 7.x family of products [Rational® Software Modeler, Rational® Systems Developer, Rational® Software Architect Standard Edition, Rational® Application Developer, Rational® Software Architect (for WebSphere® Software)], Eclipse and Rational® Team Concert. Note: the comparison chart reflects only categories of functionality that these IBM products are designed to address. Eclipse mayProduct documentationProduct information and publicationsswgrat.swg27010975Fri, 20 Nov 2009 09:00:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21395034&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSJP3D&mynp=OCSSCLKU&mync=RWhy do IBM Rational Software Modeler version 6 diagrams have a different palette than version 7.0.5 and later?Problem solving informationTechnotes(FAQs)swgrat.swg21395034Wed, 18 Nov 2009 18:09:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21393990&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RIn IBM Rational Software Modeler and IBM Rational Software Architect, if you join two diagram elements represented by custom shapes whose Filters > Stereotype and Visibility Style is set to Shape Image, the connection between the two elements will be ambiguous. The same is not true for diagram elements represented by images that are not customer shapes.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21393990Wed, 11 Nov 2009 08:03:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21410340&myns=swgrat&mynp=OCSS4JE2&mynp=OCSSCLKU&mync=RIn an IBM Rational Software Architect/IBM Rational Software Modeler profile project, can you change the default value of a stereotype class's attribute in that stereotype class's subclasses?Problem solving informationTechnotes(FAQs)swgrat.swg21410340Tue, 10 Nov 2009 13:35:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21410329&myns=swgrat&mynp=OCSS4JE2&mynp=OCSSJP3D&mynp=OCSSCLKU&mync=RIn IBM Rational Systems Developer, IBM Rational Software Architect, and IBM Rational Software Modeler, if a part is typed by a class and this class has an applied stereotype, is it possible to display this class stereotype on the part in a composite structure diagram?Problem solving informationTechnotes(FAQs)swgrat.swg21410329Tue, 10 Nov 2009 13:32:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21389513&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSSWMEQ&mynp=OCSSR27Q&mynp=OCSSMQ79&mynp=OCSS5HXK&mynp=OCSSSTWP&mynp=OCSSBSK5&mynp=OCSSJP3D&mynp=OCSSRTLW&mynp=OCSSCLKU&mynp=OCSSCM57&mynp=OCSSMMM5&mynp=OCSSJMXE&mync=RIf an individual installs multiple Rational products in the same Eclipse shell, and if the floating license for one of them is not available, can the other products, or the base Eclipse, or both another product and the base Eclipse be used?Problem solving informationTechnotes(FAQs)swgrat.swg21389513Tue, 03 Nov 2009 05:32:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21252464&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JCV&mynp=OCSSJMTC&mynp=OCSSJNRR&mynp=OCSSJP3D&mynp=OCSSRTLW&mynp=OCSSCLKU&mynp=OCSSSH32&mynp=OCSSSH27&mync=RHow do you configure and use the IBM Rational ClearCase integration using the SCM Adapter or ClearCase Remote Client within Rational Software Architect?Problem solving informationTechnotes(FAQs)swgrat.swg21252464Mon, 02 Nov 2009 09:32:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21226173&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSJP3D&mynp=OCSSCLKU&mync=RHow do you change the default color for any element on a UML diagram in IBM Rational Software Modeler and IBM Rational Software Architect without going manually to the tab for Properties > Appearance for each element?Problem solving informationTechnotes(FAQs)swgrat.swg21226173Fri, 30 Oct 2009 10:36:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21393751&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSRTLW&mynp=OCSSCLKU&mynp=OCSSMMM5&mync=RWhen installing Rational Performance Tester (RPT) or Rational Functional Tester (RFT) v8.1 into the same package group as a Rational v7.5, v7.5.1, v7.5.2, or v7.5.3 product that includes the Rational Team Concert (RTC) integration, an error occurs: Installing IBM® Rational® Software Architect Standard Edition 7.5.0 is not allowed in this package group; it is not compatible with IBM® Rational® Performance Tester 8.1.0. It may be installed in a different package group. In installation context "com.ibm.sdpProblem solving informationTechnotes(Troubleshooting)swgrat.swg21393751Fri, 23 Oct 2009 08:27:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21407779&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RIn IBM Rational Software Architect and IBM Rational Software Modeler, "Print Preview" should be included as a menu option under the "File" main menu option to be able preview a range of pages or a fit-to-one-page scaling before actually printing these pages.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21407779Wed, 21 Oct 2009 08:25:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg27013929&myns=swgrat&mynp=OCSS5HXK&mynp=OCSSCLKU&mync=RThe following information lists the updates to the information center since it was originally published for version 7.5 on 26 September 2008. This information center is located at http://publib.boulder.ibm.com/infocenter/rsmhelp/v7r5m0/index.jsp.Product documentationProduct information and publicationsswgrat.swg27013929Tue, 20 Oct 2009 14:01:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21406750&myns=swgrat&mynp=OCSSWMEQ&mynp=OCSSRJL8&mynp=OCSSR27Q&mynp=OCSSMQ79&mynp=OCSSPVS8&mynp=OCSSQ2R2&mynp=OCSS5HXK&mynp=OCSSSTWP&mynp=OCSSBSK5&mynp=OCSSRTLW&mynp=OCSSCLKU&mynp=OCSSCM5S&mynp=OCSSCM57&mynp=OCSSMMM5&mynp=OCSSJMXE&mync=RStarting October 19, IBM Rational will distribute product activation kits using the IBM Rational License Key Center. For example, Rational Jazz based products such as Rational Team Concert and Rational Quality Manager customers will now go to the License Key Center to get their product activation kits instead of IBM Passport Advantage.Newsswgrat.swg21406750Mon, 19 Oct 2009 07:18:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21406921&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RAttempts to performing a CVS update using IBM Rational Software Architect or Rational Software Modeler results in an "org.xml.sax.SAXParseException" error and model corruption.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21406921Thu, 15 Oct 2009 10:10:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21330083&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSRTLW&mynp=OCSSCLKU&mynp=OCSSMMM5&mynp=OCSSJMXE&mync=RThere are patches that must be added to your existing Eclipse 3.4.2 IDE before you can extend it with Rational Software products. Failure to add the feature and patches will lead to the inability to start the product and to extend an existing Eclipse IDE. This issue might occur with the following products: For Eclipse 3.4.2: - IBM Rational Software Architect for WebSphere Software 7.5, 7.5.1, 7.5.2, 7.5.3 and 7.5.4 - IBM Rational Software Architect Standard Edition 7.5, 7.5.1, 7.5.2 7.5.3 and 7.5.4 - IBM RProblem solving informationTechnotes(Troubleshooting)swgrat.swg21330083Fri, 09 Oct 2009 09:29:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21406402&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RWhat is the difference between the "Delete Trace" and "Unlink" commands when integrating IBM Rational Requisite Pro with IBM Rational Software Architect/IBM Rational Software Modeler?Problem solving informationTechnotes(FAQs)swgrat.swg21406402Fri, 09 Oct 2009 07:31:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21406386&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RAfter performing a Java-to-UML transformation, you may not be able to find the associations from the Java code in the UML model.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21406386Fri, 09 Oct 2009 07:24:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21406014&myns=swgrat&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RAttempts to validate a UPIA model result in the error "UPIA: A Data Exchange that is realized by an Interaction message should only refer to Task Invocation messages. Use the Realization tab of the Properties view to correct the realizing message references."Problem solving informationTechnotes(Troubleshooting)swgrat.swg21406014Thu, 08 Oct 2009 11:57:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21405462&myns=swgrat&mynp=OCSSCLKU&mync=RThis technote explains how to resolve and avoid profile corruption when using IBM Rational Software Modeler in a team environment.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21405462Fri, 02 Oct 2009 14:32:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg27016950&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RThis document contains a reference manual that describes the architecture modeling elements that are available in the UML Profile-Based Integrated Architecture (UPIA) feature in the version 7.5.4 release of Rational® modeling products. UPIA is the underlying feature used by the IBM® Rational Integrated Architecture Modeling and Management (IAM2) process.ManualsProduct information and publicationsswgrat.swg27016950Mon, 28 Sep 2009 13:27:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21404028&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSSCLKU&mync=RWhen importing a UML 2.1 XMI model from MagicDraw into any of the Rational Software Architect 7.5.4 offerings, the values of some attributes can be incorrectly truncated at whitespace. In particular, constraint bodies are known to be affected. Other attributes that are serialized similarly by MagicDraw will also be affected. This technote describes the problem and suggests workarounds.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21404028Fri, 25 Sep 2009 11:51:00 GMThttp://www.ibm.com/support/docview.wss?uid=swg21404355&myns=swgrat&mynp=OCSS5JSH&mynp=OCSS4JE2&mynp=OCSS4JCV&mynp=OCSSCLKU&mync=RWhen invoking a compare from ClearCase on xtools2 artifacts or starting a ClearCase merge manager session with xtools2 elements identified as merge candidates, ClearCase displays an error when trying to run the Xtools shell script XtoolsTypeManager.sh located in the com.ibm.xtools.comparemerge.team plugin. The identified reason is that the .sh file has a DOS encoding instead of UNIX and therefore won't run on Linux or Solaris.Problem solving informationTechnotes(Troubleshooting)swgrat.swg21404355Fri, 25 Sep 2009 11:26:00 GMThttp://www.ibm.com/legal/us/Terms of UseTerms and conditionshttp://www.ibm.com/legal/us/