ServeRAID C100 Driver Update v15.02.2013.0626 for Red Hat Enterprise Linux 5 (RHEL5) - IBM System x, Flex System and BladeCenter



Change history

ServeRAID C100 Driver Update v15.02.2013.0626 for Red Hat Enterprise Linux 5 (RHEL5) - IBM System x, Flex System and BladeCenter
Version 15.02.2013.0626
has been released.
Severity: Suggested

Adapters Supported:

  • ServeRAID C100 (81Y4475)
  • ServeRAID C105 (90Y4386

Kernels Supported:

  • megasr_15.02.2013.0626-1_rhel5.9_32.img
    • kernel-2.6.18-348.el5.i386
    • kernel-PAE-2.6.18-348.el5.i386
    • kernel-xen-2.6.18-348.el5.i386
  • megasr_15.02.2013.0626-1_rhel5.9_64.img
    • kernel-2.6.18-348.el5.x86_64
    • kernel-PAE-2.6.18-348.el5.x86_64
    • kernel-xen-2.6.18-348.el5.x86_64
  • megasr_15.02.2013.0626-1_rhel5.8_32.img
    • kernel-2.6.18-308.el5.i386
    • kernel-PAE-2.6.18-308.el5.i386
    • kernel-xen-2.6.18-308.el5.i386
  • megasr_15.02.2013.0626-1_rhel5.8_64.img
    • kernel-2.6.18-308.el5.x86_64
    • kernel-PAE-2.6.18-308.el5.x86_64
    • kernel-xen-2.6.18-308.el5.x86_64
  • megasr_15.02.2013.0626-1_rhel5.7_32.img
    • kernel-2.6.18-238.el5.i386
    • kernel-PAE-2.6.18-238.el5.i386
    • kernel-xen-2.6.18-238.el5.i386
  • megasr_15.02.2013.0626-1_rhel5.7_64.img
    • kernel-2.6.18-238.el5.x86_64
    • kernel-PAE-2.6.18-238.el5.x86_64
    • kernel-xen-2.6.18-238.el5.x86_64
  • megasr_15.02.2013.0626-1_rhel5.6_32.img
    • kernel-2.6.9-67.el5.i386
    • kernel-PAE-2.6.9-67.el5.i386
    • kernel-xen-2.6.9-67.el5.i386
  • megasr_15.02.2013.0626-1_rhel5.6_64.img
    • kernel-2.6.9-67.el5.x86_64
    • kernel-PAE-2.6.9-67.el5.x86_64
    • kernel-xen-2.6.9-67.el5.x86_64

Enhancement:

  • Implemented Cache policy (Read Policy and Write Policy) in Controller Management and Virtual Drive Management in HII
  • Added JBOD support for EFI driver

Fix:

  • Added MSIX support for 3.0 kernel
  • Modified kernel version macros to make the KPIs compatible with different version between 2.6.19 to 2.6.26
  • Fixed an issue where the date is showing one day ahead in EFI when compared to BIOS.
  • Updated device driver to continue to kick start the rebuild process, after a rebuild is started from the OS and the system is rebooted before completion of the rebuild, even when auto-resume is disabled on the controller.
  • Fixed an issue where the "Host Interface" value is inconsistent in Hii as compared to other tools.
  • Fixed an issue where chkinf may not display all active events.
  • Fixed an issue where after switching RAID to non RAID, options for RAID Storage settings are still displayed and gives the end user options to perform RAID operations.
  • Fixed an issue where Storcli hangs with execution of unsupported command-cacheflush.
  • Fixed an issue where OEM parameters are not getting populated correctly when the system is in RAID mode.
  • Fixed an issue where R5 VD PR resume was not working if system rebooted via EFI environment.
  • Fixed an issue where virtual drive properties are able to be set.
  • Fixed an issue where unsupported commands execute with improper output status as successful.
  • Fixed an issue where media error is getting detected even after 100% completion of consistency check.
  • Fixed an issue where the state of failed physical drives are not correctly shown when AutoResume and AutoRebuild are disabled and system is rebooted.
  • Fixed an issue where attempts to start patrol read on SSD at virtual disk level gives error message in MSM.
  • Fixed an issue where system cannot boot EFI install OS from 3TB PD.
  • Fixed an issue where patrol read is not starting on global hotspares.

To view PDF files you must have the latest version of Adobe Acrobat installed on your system.

Supported products

Supported systems

 

Supported options

 

Supported operating systems

 

Applicable countries and regions

 


Document id:  MIGR-5088768
Last modified:  2013-09-26
Copyright © 2014 IBM Corporation