Emulex firmware version 4.1.442.0 list of supported systems - IBM Servers



Source

RETAIN tip: H21701

Symptom

Emulex firmware version 4.1.442.0 was inadvertently released as supported on the HS23 BladeServer and the VFA-II option for HS22, HS22v, HS23 and HX5 BladeServers. The corrected list of supported system is below:

  • System x3630 M4 7158
  • BladeCenter HS23E 8038,8039
  • System x3550 M4 7914
  • System x3850 X5 / x3950 X5 7145,7146
  • System x3850 X5 / x3950 X5 7143,7191 32-64
  • System x3250 M4 2583
  • System x3100 M4 2582
  • System x3690 X5 7148,7149
  • Refresh System x3690 X5 7147,7192
  • System X iDataPlex dx360 M4 7912,7913
  • System x iDataPlex Direct Water Cooled dx360 M4 server 7918,7919
  • System x3650 M4 7915
  • 2-way System x3530 M4 7160
  • System x3500 M4 7383
  • System x3300 M4 7382

Affected configurations

The system may be any of the following IBM servers:

  • BladeCenter HS22, type 1911, any model
  • BladeCenter HS22, type 1936, any model
  • BladeCenter HS22, type 7870, any model
  • BladeCenter HS22V, type 1949, any model
  • BladeCenter HS22V, type 7871, any model
  • BladeCenter HS23, type 1929, any model
  • BladeCenter HS23, type 7875, any model
  • BladeCenter HX5, type 1909, any model
  • BladeCenter HX5, type 1910, any model
  • BladeCenter HX5, type 7872, any model
  • BladeCenter HX5, type 7873, any model

The system is configured with one or more of the following IBM Options:

  • Emulex 10 Gb Ethernet Virtual Fabric Adapter Advanced II for IBM BladeCenter HS23, Option 90Y9332, any CRU
  • Emulex 10 Gb Ethernet Virtual Fabric Adapter Advanced II for IBM BladeCenter, Option 90Y3566, any CRU
  • Emulex 10 Gb Ethernet Virtual Fabric Adapter Advanced for IBM BladeCenter, Option 49Y4275, any CRU
  • Emulex 10 Gb Ethernet Virtual Fabric Adapter II Option, for IBM system x, Option 49Y7951, any CRU
  • Emulex 10 Gb Ethernet Virtual Fabric Adapter II for IBM BladeCenter HS23, Option 81Y3120, any CRU
  • Emulex 10 Gb Ethernet Virtual Fabric Adapter II for IBM BladeCenter, Option 90Y3550, any CRU
  • Emulex 10 Gb Ethernet Virtual Fabric Adapter II, for IBM System x, Option 49Y7950, any CRU

This tip is not software specific.

The Emulex firmware for the VFA II or on board LOM is affected.

Workaround

Upgrade Emulex firmware to supported version posted on FixCentral.

Additional information

Users should immediately move to a supported release of the Emulex firmware.

Recommend Emulex firmware Version: 4.6.166.9 or later.

Applicable countries and regions

 


Document id:  MIGR-5093579
Last modified:  2013-08-30
Copyright © 2014 IBM Corporation